LCR-T4 Mega328 ESR Transistor Tester Capacitance Diode Triode Meter NPN/PNP
Suit For: LCR-T4 Transistor Tester Diode Triode Capacitance ESR Mete
For LCR-T4 Transistor Tester
- 2013 latest M328 version of the software ,more functions.Chip: Atmega328
- 128*64 big Backlight LCD display,only 2mA when stand by.
- Using 9V battery (Not included)
Test ranges:
Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube , ESR,
Resistance,Adjustable potentiometer
Resistance :0.1 ohm resolution, maximum 50M ohm
Capacitor :25pf -100,000 uf
Inductors : 0.01mh-20H
Function:
- Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET,
diode (including double diode), thyristor, transistor, resistor and capacitor and other components
- Automatic test the pin of a component, and display on the LCD
- Can detect the transistor, MOSFET protection diode amplification coefficient
and the base to determine the emitter transistor forward biased voltage
- Measure the gate and gate capacitance of the MOSFET threshold voltage
- Use 12864 liquid crystal display with green backlight
Specifications:
*One -button operation, automatic shutdown .
*Only 20nA shutdown current.
*Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET,
JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.
*Automatic identification components pin arrangement .
*Measuring bipolar transistor current amplification factor and base - emitter threshold voltage.
*Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.
*Can detect bipolar transistors and MOS transistors protection diodes.
*Measuring the gate MOS FET threshold voltage and the gate capacitance.
*Can simultaneously measure two resistors and resistor symbol is displayed.
Displayed on the right with a decimal value of 4 .
Resistance symbol on both sides shows the pin number.
So you can measure the potentiometer.
If the potentiometer wiper is not transferred to an extreme position ,
we can distinguish the middle and both ends of the pin.
*Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
*Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.
*2uF more capacitors can simultaneously measure the equivalent series resistance ESR values.
The two can be displayed with a decimal value , resolution 0.01 ohms.
*Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
*LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
*Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.
*Can measure a single diode reverse capacitance.
If the bipolar transistor connected to the base and collector or emitter of a pin ,
it can measure the collector or emitter junction reverse capacitance .
*can be obtained with a single measurement rectifier bridge connection.
Package Included:
1 * Transistor Tester
1 * Case